Cisco 4-port Ethernet Switch

Product Detail:

Cisco EtherSwitch HWICs are 10/100BaseT Layer 2 Ethernet switches with Layer 3 routing capability. (Layer 3 routing is forwarded to the host, and is not actually performed at the switch.). Traffic between different VLANs on a switch is routed through the router platform. Any one port on a Cisco EtherSwitch HWIC may be configured as a stacking port to link to another Cisco EtherSwitch HWIC or EtherSwitch network module in the same system. An optional power module can also be added to provide inline power for IP telephones.

Product Specitications:
CISCO manufactured Four port 10/100 Ethernet switch interface card

• Manufacturer: CISCO
• Manufacturer Code: HWIC-4ESW-POE=
• Product Description: Cisco EtherSwitch HWIC - switch - 4 ports
• Device Type: Switch
• Form Factor: Plug-in module
• Dimensions (WxDxH): 7.8 cm x 12 cm x 1.9 cm
• Weight: 0.1 kg
• Ports Qty: 4 x Ethernet 10Base-T, Ethernet 100Base-TX
• Data Transfer Rate: 100 Mbps
• Data Link Protocol: Ethernet, Fast Ethernet
• Remote Management Protocol: SNMP 1, SNMP 2, Telnet, SNMP 3
• Communication Mode: Half-duplex, full-duplex
• Features: Flow control, full duplex capability, Layer 2 switching, auto-sensing per device, auto-negotiation, trunking, VLAN support, auto-uplink (auto MDI/MDI-X)
• Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.1x
• System Requirements: Cisco IOS 12.3(8)T